Contents
1. Overview & Purpose
Many CAD drawings produced by surveyors, architects, and engineers are saved without any real-world coordinate reference system — or they use a coordinate system that does not directly match British National Grid (BNG). The GISCO DXF Geocoder solves this by letting you visually align a drawing on a live map and then export it with correct georeferenced coordinates baked in.
The tool runs entirely in your web browser with no installation required and no data sent to any server. Files are processed locally on your machine.
2. Typical Workflow
- Load a file — drop a DXF or DWF onto the file panel or click to browse. The tool auto-detects the coordinate system and unit scale.
- Navigate to the right area — use the postcode search to fly the map to the correct location.
- Position the drawing — switch to Drag DXF mode and drag the overlay to roughly the right position. Use Nudge buttons for fine adjustment.
- Adjust scale if needed — if the drawing is the wrong size, use the Scale Factor control in the file panel.
- Check the position — the Position panel shows live BNG coordinates. Toggle the satellite basemap to verify alignment against imagery.
- Export — click Export Georef DXF or Export KML. Both files will contain the correct real-world coordinates.
3. Toolbar Controls
The toolbar runs along the top of the screen and contains all the primary controls.
Mode
| Button | Location | Description |
|---|---|---|
| Pan/Zoom | Header | The default map navigation mode. Click and drag the map to pan; use the scroll wheel or pinch to zoom. The DXF overlay stays fixed while you move the map. |
| Drag DXF | Header | Switches to drawing repositioning mode. Click and drag anywhere on the map to move the DXF overlay. A yellow banner appears confirming this mode is active. Press Escape or click Pan/Zoom to return to normal navigation. |
| ↩ Prev Extent | Header | Returns the map to its previous view position and zoom level. The button is greyed out until you have navigated at least once — for example after a postcode fly-in. Click repeatedly to step back through your navigation history (up to 50 steps). |
Nudge — fine positioning
When the drawing is close to the correct position, use the Nudge buttons to move it precisely without switching to Drag mode.
| Button | Location | Description |
|---|---|---|
| ← W E → ↑ N ↓ S | Header — Nudge (1m) | Moves the DXF overlay exactly 1 metre in the indicated compass direction (West, East, North, South) each time you click. |
| ◄◄ ►► ▲▲ ▼▼ | Header — Nudge (10m) | Moves the DXF overlay exactly 10 metres in the indicated direction. Useful for larger adjustments without switching to Drag mode. |
Opacity
| Control | Location | Description |
|---|---|---|
| Opacity slider | Header | Controls how transparent the DXF overlay appears over the map. Drag left to make it more transparent (useful for comparing against underlying imagery) or right to make it fully opaque. Default is 80%. |
Offset, Copy & Export
| Button | Location | Description |
|---|---|---|
| Reset Offset | Header | Resets any drag or nudge positioning back to zero. The drawing will return to the position it was in when first loaded. Does not affect the scale factor. |
| Copy BNG Offset | Header | Copies the current East and North offset values (in metres) to the clipboard. Useful for noting down or sharing the positioning adjustment that has been applied. |
| ⬇ Export Georef DXF | Header | Downloads the loaded drawing as a new DXF file with all coordinates converted to British National Grid (EPSG:27700) metres. The exported file can be loaded into AutoCAD, QGIS, ArcGIS, or any other GIS or CAD software. Greyed out until a file is loaded. |
| ⬇ Export KML | Header | Downloads the drawing as a KML file with coordinates in WGS84 (latitude/longitude), suitable for Google Earth, QGIS, ArcGIS Online, and the ArcGIS Experience Builder Add Data widget. A warning is shown if the file exceeds 10 MB, as this is the limit for the Experience Builder widget. Greyed out until a file is loaded. |
| ℹ About | Header — far right | Opens the About panel, which shows the GISCO logo, a summary of the tool's purpose and features, and licensing information. |
4. Postcode Search
⌖ Search bar — centred top of map
Type a full UK postcode (e.g. CW10 9AG) into the search box and press Enter or click Go. The map will fly smoothly to that postcode location at street level (zoom 17), and a temporary blue marker will appear for a few seconds to mark the spot.
Spaces in postcodes are optional — both CW109AG and CW10 9AG are accepted. Postcode lookup is provided by postcodes.io.
5. Position Information Panel
Position — bottom left of map
| Field | Description |
|---|---|
| BNG Offset E | The eastward offset in metres that has been applied to the drawing by dragging or nudging. Zero means the drawing is in its original loaded position. Positive values mean it has been moved east. |
| BNG Offset N | The northward offset in metres. Positive means the drawing has been moved north. |
| Adj. BNG E | The adjusted British National Grid Easting of the drawing's centre point after all offsets and scaling have been applied. This is the actual BNG coordinate that will be written to the exported file. |
| Adj. BNG N | The adjusted British National Grid Northing of the drawing's centre point. |
| Mouse Lat / Mouse Lon | Live latitude and longitude of the current mouse cursor position on the map, updated as you move the mouse. Useful for checking positions against known coordinates. |
6. File Loader Panel
📂 Load DXF / DWF — bottom right of map
This panel handles loading your drawing file and configuring how its coordinates are interpreted.
| Control | Description |
|---|---|
| Drop zone | Drag and drop a .dxf or .dwf file from your file manager onto this area to load it. Alternatively, click the drop zone to open a standard file browser. Any previously loaded drawing is cleared when a new file is loaded. |
| File info display | After loading, shows the filename, the number of drawing entities parsed, and the coordinate range found in the file. Useful for confirming the correct file has been loaded. |
| Coordinate system buttons (BNG / WGS84 / Local) |
The tool automatically detects the coordinate system. The detected mode is highlighted. You can override it manually if the detection is wrong:
|
| Scale factor input | If the drawing is the wrong size on the map, the units may not be metres. Type a scale factor to convert drawing units to metres. For example, if the drawing is in millimetres, enter 0.001. The tool will attempt to auto-detect common units. |
| ÷1000 | Sets the scale factor to 0.001 — converts millimetres to metres. Use when the CAD drawing units are millimetres. |
| ÷100 | Sets the scale factor to 0.01 — converts centimetres to metres. |
| ft→m | Sets the scale factor to 0.3048 — converts feet to metres. Use for drawings produced in imperial units. |
| ×1 | Resets the scale factor to 1 (metres). Use if auto-detection has set an incorrect scale. |
7. Layer Visibility Panel
Layers — top right of map
Lists all the DXF layers found in the loaded drawing. Each layer is shown with a coloured swatch and its name.
Click any layer row to toggle that layer on or off. Hidden layers are shown with a strikethrough. All entities on hidden layers are removed from the display and will not be included in exported files.
Hiding unwanted layers before exporting KML is a useful way to reduce the file size — important if the output needs to stay below the 10 MB limit for ArcGIS Experience Builder's Add Data widget.
8. Basemap Switcher
Basemap switcher — top left of map (below zoom controls)
A small layers icon appears on the top-left of the map, just below the zoom buttons. Hover over it to reveal three background map options you can switch between:
| Basemap | Description |
|---|---|
| CARTO Voyager | The default basemap. A clean, colourful street map based on OpenStreetMap data, served by CARTO. Good for general navigation and postcode searching. |
| CARTO Positron | A very light, minimal grey-and-white style. Excellent for GIS work as the DXF overlay stands out clearly against the pale background. |
| CARTO Dark Matter | A dark background style. Useful when working in low-light conditions or when you want strong contrast for the coloured DXF layer lines. |
9. Keyboard Shortcuts
| Key | Action |
|---|---|
| Arrow keys | Nudge the DXF 1 metre in the arrow direction (only active in Drag DXF mode) |
| Shift + Arrow keys | Nudge the DXF 10 metres in the arrow direction |
| D | Switch to Drag DXF mode |
| P | Switch to Pan/Zoom mode |
| Escape | Return to Pan/Zoom mode (also closes the About panel) |
| Enter (in search box) | Execute the postcode search |
| Escape (in search box) | Close the search results |
10. Tips & Notes
File size
The tool handles DXF files up to several hundred megabytes. There is no enforced file size limit, though very large files may take a few seconds to parse.
KML and Experience Builder
ArcGIS Experience Builder's Add Data widget has a 10 MB limit for KML files. If your export exceeds this, the tool will warn you before downloading. To reduce the file size, hide any layers you do not need before exporting.
Drawing with no coordinate system
If a drawing loads positioned over the ocean or Africa, it has local/unknown coordinates. The tool will automatically place it over central England as a starting point. Use the postcode search to navigate to the correct area, then use Drag DXF to position the drawing precisely.
Scale auto-detection
The tool will attempt to detect if a drawing is in millimetres, centimetres, inches, or feet and set the scale factor automatically. If the drawing appears far too large or too small on the map, check the scale factor in the file panel and adjust it using the preset buttons or by typing a value directly.
BNG vs Local mode exports
In BNG mode, the exported coordinates are the original drawing coordinates (which are already in BNG), with any small nudge offset added. In Local/Unknown mode, the exported coordinates are calculated by mapping the drawing's own centre to wherever you dragged it on the map — the drag position becomes the full georeferencing.
Disclaimer
This software is provided free to use, "as is", without warranty of any kind. Use at your own risk.